- Home
- Equipment
Refine by
Delta Ohm Environmental Equipment & Supplies
25 equipment items found
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD2102.1 and HD2102.2 are portable instruments with a large LCD display. They measure illumination, luminance, PAR and irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or in the measurement of effective irradiance according to the UV action curve). The probes are fitted with the SICRAM automatic detection module: in addition to detection, the unit of measurement selection is also ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The Photo-Radiometer Model HD2302.0 keyboard is composed of single-function keys, except the ON-OFF/Auto-OFF key that has two functions (see the description of the key below). The pressing of a key is accompanied by a short confirmation 'beep': a longer 'beep' sounds if the wrong key is ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD2010UC is an integrating portable sound level meter performing statistical analyses. The instrument has been designed combining price competitiveness and simplicity of use. Attention has been paid to the possibility of updating the instrument, and the HD2010UC can be integrated, at any time, with other options to extend its application scope. The firmware can be upgraded directly by the ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD206…/HD226… and HD207…/HD227… series dataloggers are low-cost, rugged instruments for a long-term reliable monitoring of temperature and temperature/relative humidity measurements. They are available in different versions: with or without LCD display, with sensors either inside or outside the instrument housing, or with cable connection. The analysis of logged data is made using Delta Log2 ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
LP PHOT 02 probe measures illuminance (lux), defined as the ratio between the luminous flux (lumen) passing through a surface and the surface area (m2). The spectral response curve of a photometric probe is similar to the human eye curve, known as standard photopic curve V(λ). The difference in spectral response between LP PHOT 01 and the standard photopic curve V(λ) is calculated ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
2 axes ultrasonic Anemometers series HD 52.3D…. The instruments of the series HD52.3D… are 2 axes ultrasonic static anemometers for measuring: ! Wind speed and direction, U-V Cartesian components of wind speed, ! Relative Humidity and Temperature (option, code “17”), ! Diffuse Solar Radiation (option, code “P”), ! Barometric pressure (option, code “4”). All models are equipped with ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD31 is a hand held multifunction meter and data logger, with a large (43 x 58 mm) graphic color LCD display. It is equipped with three independent inputs. Each of the inputs allows connecting SICRAM probes (intelligent and interchangeable probes with calibration data stored inside), single parameter ones as well as combined ones, for the measurement of a variety of physical quantities: ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD2022 sound level calibrator is a portable, battery operated sound source, suitable for sound level meters and acoustic stations. It allows calibrating ½” and ¼” microphones with mechanical dimensions compliant with IEC 61094-1 (“Measurement microphones. Part 1: Specifications for laboratory standard microphones”) and IEC 61094-4 (“Measurement microphones. Part 4: Specifications for ...
Manufactured by:MeteoXperts Solutions Pvt Ltd based in, INDIA
The HD2302.0 LLM-Basic Kit is a lux sensor designed for measuring light levels, typically in environments where accurate illumination measurements are required. The HD2302.0 LLM-Basic Kit is a versatile light measurement system used for assessing illumination levels. It is commonly employed in applications where precise light intensity measurements are necessary, such as in environmental ...
Manufactured by:MeteoXperts Solutions Pvt Ltd based in, INDIA
A soil temperature probe, such as the TP32MTT.03, is a device used to measure the temperature of soil at various depths. The TP32MTT.03 is a type of thermistor probe, which uses a thermistor (a type of resistor that changes resistance with temperature) to measure soil temperature. The TP32MTT.03 probe is designed for use in a variety of soil types and has a measurement range of -40 to +85 ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
Three channel vibration analyzer HD2070 is a portable vibration analyzer performing spectral and statistical analysis on three channels simultaneously. The instrument measures all parameters required by current regulations concerning workers protection from vibration related risks and is able to measure vibrations transmitted to both hand-arm and whole body. It has been designed combining ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD2015 is a reliable and sturdy bucket rain gauge, entirely constructed of corrosion resistant materials in order to guarantee its durability. To ensure accurate measurements even with low temperature climatic conditions or during and after precipitations of snow, a version with heating system, automatically activated around +4 °C, has been developed to prevent snow deposits and ice ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD 9408T BARO, HD 9408TR BARO and HD 9908T BARO are analog output electronic barometers. They use a piezoresistive sensor element which gives extremely accurate and stable measurement of the atmospheric pressure and assures excellent repeatability, low hysteresis and very good temperature stability. The output signal of the sensor is conditioned to provide a voltage or a current output ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD408T, HD4V8T are analog output relative or differential atmospheric pressure transmitters; they are used in all those applications where non corrosive air or gas need to be monitored, with pressure fields from 10 mbar to 2000 mbar. The piezoresistive sensor gives extremely precise and stable measurements of the applied differential pressure, with excellent repeatability, low hysteresis, and ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD48.. and HD49.. series of transmitters measure temperature, relative humidity and dew point. Versions with only standard analog output or with only RS485 output with MODBUS‑RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC. The ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD2030 is a portable 4 channel vibration analyzer able to perform spectral and statistical analysis. The instrument can supply all the measurement parameters required by the current normative concerning the operators protection from the risk connected with the vibrations and is able to measure in hand-arm and whole body modes. It is also possible to determine the vibrations transmitted to a ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD2402 is a portable datalogger photo-radiometer for the measurement of noncoherent optical radiations in accordance with 2006/25/CE European directive and legislative decree No 81 of 9 April 2008. The instrument consists of a series of sensors used to cover the different portions of the spectrum and of a small LASER used to point the analyzed source. The different sensors operate in the ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
The HD32MT.1 is a 16-channel data logger capable of capturing and logging the values measured by a series of sensors connected to its inputs. The data logger is completely programmable by the user and is therefore very versatile. The supplied HD32MTLogger application software, supplied with the instrument, allows simple and intuitive programming by using graphic interfaces, without the need of ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD 2110L Integrating Sound Level Meter - Portable Analyzer the HD2110L is a precision integrating portable sound level meter, with data logging functions, performing both spectrum and statistical analysis. The instrument has been designed in order to offer high-performance analysis of acoustic phenomena. Attention has been paid to the possibility of adjusting the instrument to regulatory ...
Manufactured by:Senseca Italy S.r.l. based inSelvazzano Dentro, ITALY
HD2003 and HD2003.1 are three axis ultrasonic anemometers, they measure the speed and direction of wind, the U-V-W Cartesian components of speed, sound speed and sonic temperature. The HD2003 allows also to detect temperature and relative humidity of the air and barometric pressure. The HD2003 main features are: • Determination of the anemometric quantities represented in diverse measurement ...